Ga door naar hoofdinhoud

Sostituzione telaio centrale Google Pixel

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 5 handleidingen die deze stap bevatten.

Stap 4
Google Pixel Midframe Replacement: stap 0, afbeelding 1 van 3 Google Pixel Midframe Replacement: stap 0, afbeelding 2 van 3 Google Pixel Midframe Replacement: stap 0, afbeelding 3 van 3
  • Slide the opening pick up both sides of the device in the small space between the midframe and the rear case to release the clips holding it in place.

  • Note that the clips are not released by sliding through them, but rather the inward pressure the opening pick creates as it enters the gap around them.

  • If the clasps fail to come undone, try pushing the edge you're working on inward with your hand, or using a thicker tool like a spudger.

  • Do not attempt to remove the midframe yet! There is still a fragile ribbon cable underneath connecting the earpiece speaker to the motherboard.

Fate scorrere lo strumento di apertura su entrambi i lati del dispositivo nel piccolo spazio tra il telaio centrale e la scocca posteriore per sbloccare le clips che tengono fermo il tutto.

Nota che le clips non vengono sbloccate dall'attrezzo che scorre tra di esse, ma bensì dalla forza verso l'interno che esso crea quando entra tra gli spazzi tra le clips.

Se le clips non dovessero sbloccarsi, provate a premere con le dita sui lati dove state cercando di aprire, o usando un attrezzo più grosso come uno spudger.

Non tentate di rimuovere già il telaio centrale! C'è ancora un cavo piatto fragile sotto, che collega il connettore dell'altoparlante alla scheda madre.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.