Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 14
Cutouts in the aluminum case between the center battery cell and trackpad may prevent the adhesive remover from flowing all the way underneath the battery. To compensate, apply a few more drops of adhesive remover along each side of the center battery cell.
  • Cutouts in the aluminum case between the center battery cell and trackpad may prevent the adhesive remover from flowing all the way underneath the battery.

  • To compensate, apply a few more drops of adhesive remover along each side of the center battery cell.

  • Wait 2-3 minutes before proceeding to the next step.

在中部电池组和触摸板之间的铝制机身挖空部分可能会使得除胶剂无法完全流到电池之下。

为了弥补这一点,在中部电池组的每个边缘都涂几滴除胶剂。

在进行下一个步骤之前先等2-3分钟。

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.