Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 9
Gently work the card deeper under the battery cell to break up the adhesive securing it in place. This should not require much force—the adhesive remover does most of the work. If you aren't able to get your card under the battery cell, apply a bit more adhesive remover as instructed above and wait 2-3 minutes before trying again.
  • Gently work the card deeper under the battery cell to break up the adhesive securing it in place.

  • This should not require much force—the adhesive remover does most of the work. If you aren't able to get your card under the battery cell, apply a bit more adhesive remover as instructed above and wait 2-3 minutes before trying again.

轻轻地让卡片深入到电池组之下,将固定用的胶扯开。

这个动作不应该太过用力——除胶剂已经做了绝大部分工作。如果你不能把卡片插到电池组以下,就按之前的介绍多涂一点除胶剂,再等个2、3分钟再重试一遍。

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.