Beschrijf het specifieke gedeelte of onderdeel van deze device waar u mee bezig bent. Voorbeeld: batterij
Maak een titel aan.
Geef achtergrondinformatie weer voordat de lezer de handleiding induikt.
Stap 1
Caution: Ensure your laptop has been powered down.
Stap 2
Use a T5 Torx screwdriver to remove the screws along the edge of the bottom cover.
Stap 3
Carefully remove the back cover.
Stap 4
Caution: Be mindful of static electric charge across the battery port. Usage of an antistatic strap is recommended but not required.
Stap 5
Disconnect yellow-colored ribbon cable from its port which sits at the bottom left of the fan housing.
Stap 6
Dislodge the CMOS battery.
Stap 7
Use a Phillips #00 screwdriver to loosen the screws that secure the heat sink's heat spreader.
Stap 8
Grip the heat sink from the sides and carefully lift it up to remove it.
Stap 9
Use a Phillips screwdriver to remove the two cooling fan screws.
Stap 10
Unplug the fan cable.
Stap 11
The cooling fan can now be removed and a new one can be installed.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.