Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Stap 5
The side of the retainer that has a ridged surface needs to face down in the watch. The retainer sits in the groove around the inside of the metal bezel as shown in the image. Take notice of the orientation of the retainer in the image. The retainer should seat in the groove on the bezel without applying force.
Re-Assembly
  • The side of the retainer that has a ridged surface needs to face down in the watch.

  • The retainer sits in the groove around the inside of the metal bezel as shown in the image. Take notice of the orientation of the retainer in the image. The retainer should seat in the groove on the bezel without applying force.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.