Ga door naar hoofdinhoud

Sostituzione pannello LCD iPad 3 4G

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 48 handleidingen die deze stap bevatten.

Stap 2
iPad 3 4G LCD Replacement: stap 0, afbeelding 1 van 3 iPad 3 4G LCD Replacement: stap 0, afbeelding 2 van 3 iPad 3 4G LCD Replacement: stap 0, afbeelding 3 van 3
  • Flip up the retaining flap on the LCD ribbon cable ZIF connector.

  • Using your fingers or a pair of tweezers, pull the LCD ribbon cable from its socket on the logic board.

  • You may have to force restart the iPad by holding down the power button and home button for at least ten seconds until you see the Apple logo if the LCD screen doesn't power on after connecting the ZIF connector for the LCD screen when putting everything back together.

Ruota verso l'alto l'aletta di bloccaggio sul connettore ZIF del cavo a nastro del pannello LCD.

Usando le dita o un paio di pinzette, sfila il cavo a nastro del pannello LCD dalla sua presa sulla scheda madre.

Potresti dover riavviare forzatamente l'iPad tenendo premuti i tasti di accensione e Home per almeno dieci secondi finché non vedi il logo Apple se il pannello LCD non si accende dopo aver collegato il suo connettore ZIF durante il rimontaggio.

[* black] Flip up the retaining flap on the LCD ribbon cable ZIF connector.
-[* black] Using your fingers or a pair of tweezers, pull the LCD ribbon cable from its socket on the logic board.
+[* black] Using your fingers or a pair of [product|IF145-020|tweezers], pull the LCD ribbon cable from its socket on the logic board.
[* icon_reminder] You may have to force restart the iPad by holding down the power button and home button for at least ten seconds until you see the Apple logo if the LCD screen doesn't power on after connecting the ZIF connector for the LCD screen when putting everything back together.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.