Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 5 handleidingen die deze stap bevatten.

Stap 1 vertalen

Stap 1
Heat the back cover of your Xperia Z3 to loosen the adhesive underneath. If you use an iOpener, follow these instructions for use. Lift up the back cover with a suction handle and put an opening pick in the gap.
  • Heat the back cover of your Xperia Z3 to loosen the adhesive underneath.

  • If you use an iOpener, follow these instructions for use.

  • Lift up the back cover with a suction handle and put an opening pick in the gap.

  • Move the pick carefully around the edges to loosen the adhesive on every side of the phone.

  • Don't put the pick in too deep under the back cover to not damage any parts inside the phone.

バックカバーを加熱して、下の接着剤を緩めます。

吸引ハンドルでバックカバーを持ち上げ、隙間にピックを入れてください。

ピックを慎重に端の周りに動かして、各側面にある接着剤を緩めます。

ピックを深く入れすぎないで下さい。内部に損傷を与えてしまいます。

[* black] Heat the back cover of your Xperia Z3 to loosen the adhesive underneath.
+ [* icon_note] If you use an iOpener, follow these [guide|11677|instructions] for use.
[* black] Lift up the back cover with a suction handle and put an opening pick in the gap.
[* black] Move the pick carefully around the edges to loosen the adhesive on every side of the phone.
[* icon_caution] Don't put the pick in too deep under the back cover to not damage any parts inside the phone.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.