Ga door naar hoofdinhoud

Stap 1 vertalen

Stap 1
Gently insert a spudger along the side of the speaker on the back casing assembly. Pry the speaker off the casing and remove it. The speaker is adhered to the casing with light tape, which may give the speaker light resistance.
  • Gently insert a spudger along the side of the speaker on the back casing assembly. Pry the speaker off the casing and remove it.

  • The speaker is adhered to the casing with light tape, which may give the speaker light resistance.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.