Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Nederlands
Engels

Phillips Azure Steam Iron Disassembly

Handleidingsinformatie

= Klaar = Onvolledig

      Beschrijf het specifieke gedeelte of onderdeel van deze device waar u mee bezig bent. Voorbeeld: batterij

      Maak een titel aan.

      Deze korte samenvatting zal enkel in zoekresultaten verschijnen.

      Geef achtergrondinformatie weer voordat de lezer de handleiding induikt.

      Stappen

      Stap 1

      Start your disassembly on a clean desk, make sure you have trays to store screws and other components, to prevent losing them

      Stap 2

      Image 1: Remove the plastic cover to expose the screw

      Stap 3

      Take the top part of the handle, which you removed from the iron in the step before.

      Stap 4

      To replace the rubber component in the front of the appliance, remove it with your hand and replace it with a new one.

      Stap 5

      To replace the lamp on top of the handle of the steaming iron, detatch te wires carefully from the plastic components

      Stap 6

      Follow the instructions at this step if you experience trouble with the top sliding button of the appliance

      Stap 7

      This step removes the remaining part of the handle to gain access to the bottom part of the steam iron

      Stap 8

      By following step 8 and 9 you will detatch the back surface of the steam iron and expose the electrical wires. These steps also need to be completed to remove the water tank

      Stap 9

      Image 1: Remove the 'back' of the steam iron with your hand

      Stap 10

      Step 10,11 &12 will help you remove the water tank

      Stap 11

      Remove the 2 screws in front of the steam iron as shown in the pictures. After removing these pictures the watertank can be removed, which is described in the next step

      Stap 12

      Image 1: Use your screwdriver to 'unclick' the snapjoint at the front to detach the water tank from the bottom of the product , as shown in the image.

      Stap 13

      This step shows how to remove the metal plate

      Stap 14

      Image 1: Detach the white sides of the steam iron by pulling them away from the assembly.

      Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.