Ga door naar hoofdinhoud

Stap 3 vertalen

Stap 3
Remove the two 4.76 mm Phillips #0 screws that secure the SSD. When the screws are removed, one end of the SSD should pop up. Slide the SSD out of its socket and lift it out of the compartment.
  • Remove the two 4.76 mm Phillips #0 screws that secure the SSD.

  • When the screws are removed, one end of the SSD should pop up.

  • Slide the SSD out of its socket and lift it out of the compartment.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.