Ga door naar hoofdinhoud
Stap 10
This is a well-connected motherboard; to get it free, we pop off the digitizer, backlight, and speaker connectors, two antennas, and the two Joy-Con rails. And then remove six Phillips screws. But hey, that's some awesome modularity. Even the eMMC storage pops off with an independent PCB! Nintendo made a 6.2" tablet with removable flash storage, so don't say it can't be done.
  • This is a well-connected motherboard; to get it free, we pop off the digitizer, backlight, and speaker connectors, two antennas, and the two Joy-Con rails. And then remove six Phillips screws.

  • But hey, that's some awesome modularity. Even the eMMC storage pops off with an independent PCB!

  • Nintendo made a 6.2" tablet with removable flash storage, so don't say it can't be done.

  • The storage board contains a single Toshiba THGBMHG8C2LBAIL 32 GB eMMC NAND Flash IC.

  • Sadly, the modularity ends at the USB-C port. This high-wear component will require some intense soldering skills to replace.

Esta es una placa base bien conectada; para liberarla, sacamos los conectores del digitalizador, la luz de fondo, los altavoces, las dos antenas y los dos rieles Joy-Con. Y luego quitamos seis tornillos Phillips.

Pero bueno, esa es una modularidad increíble. ¡Incluso el almacenamiento eMMC sale con una PCB independiente!

Nintendo hizo una tableta de 6.2" con almacenamiento flash extraíble, así que no digas que no se puede hacer.

La placa de almacenamiento contiene un solo IC Flask eMMC NAND Toshiba THGBMHG8C2LBAIL de 32 GB.

Lamentablemente, la modularidad termina en el puerto USB-C. Este componente de alto desgaste requerirá algunas habilidades de soldadura intensas para reemplazarlo.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.