Repareer je spullen Gemeenschap Winkel

Smontaggio Nintendo Switch

Terug naar de handleiding
Engels
Italiaans
Stap 8
Nintendo Switch Teardown: stap 0, afbeelding 1 van 3 Nintendo Switch Teardown: stap 0, afbeelding 2 van 3 Nintendo Switch Teardown: stap 0, afbeelding 3 van 3

  • With battery bested, we turn to the next hardware priority: the cooling system.

  • The heatpipe is secured by simple Phillips screws, meaning thermal paste reapplication should be a breeze.

  • We aim for the fan, but looks like you can only clean it from here—it's trapped under the I/O board.

  • So we pop out the game card reader, and attached headphone jack.

  • And no, we didn't lick any cartridges.

  • STMicroelectronics FingerTip touchscreen controller on the opposite side of the game card reader

Venuti a capo della batteria, ci rivolgiamo alla successiva priorità hardware: il sistema di raffreddamento.

Il condotto termico è fissato da semplici viti Phillips, il che significa filar via lisci con la riapplicazione della pasta termica in fase di rimontaggio.

Cerchiamo di arrivare alla ventola, ma sembra che da qui si possa soltanto pulire: è intrappolata sotto la scheda di interfaccia I/O.

E quindi estraiamo il lettore di game card e il jack degli altoparlanti che è collegato.

E, no, non abbiamo leccato nessuna card.

[* black] With battery bested, we turn to the next hardware priority: the cooling system.
[* black] The heatpipe is secured by simple Phillips screws, meaning thermal paste reapplication should be a breeze.
[* black] We aim for the fan, but looks like you can only clean it from here—it's trapped under the I/O board.
[* black] So we pop out the game card reader, and attached headphone jack.
[* icon_reminder] And no, we didn't [http://www.theverge.com/2017/3/1/14778316/nintendo-switch-cartridge-taste-test-dont-lick-it|lick any cartridges].
+[* icon_note] STMicroelectronics [link|https://www.st.com/en/touch-and-display-controllers/fingertip.html|FingerTip] touchscreen controller on the opposite side of the game card reader

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.