Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands

Stap 1 vertalen

Stap 1
Before you begin with the dismount procedure of your pneumatic spring you should press your shapeshifter lever once to make sure your bike is in XC mode. Reduce tensile stress by twisting the adjuster on your shapeshifter cable as close as you can to the lever. Reduce tensile stress by twisting the adjuster on your shapeshifter cable as close as you can to the lever.
  • Before you begin with the dismount procedure of your pneumatic spring you should press your shapeshifter lever once to make sure your bike is in XC mode.

  • Reduce tensile stress by twisting the adjuster on your shapeshifter cable as close as you can to the lever.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.