Beschrijf het specifieke gedeelte of onderdeel van deze device waar u mee bezig bent. Voorbeeld: batterij
Maak een titel aan.
Geef achtergrondinformatie weer voordat de lezer de handleiding induikt.
Stap 1
First you need to open the toothbrush. This can be achieved by applying pressure to the lower end of the toothbrush which will alow the removal of the bottom cap.
Stap 2
Once the bottom cap is removed, use a screwdriver or a knife to release the actual insides of the toothbrush.
Stap 3
Once you have the insides out, you have to look for this area.
Stap 4
The magnets are secured by two screws. One is easily accessible on the back of the toothbrush.
Stap 5
Apply some pressure to remove the circuit board and get access to the screw holding the magnets on the front side.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.