Ga door naar hoofdinhoud
Stap 9
The cover should now come out. It will require some bending and pay attention to the motherboard while performing this task. Remove the connectors (as shown on image 2 and 3) Remove the connectors (as shown on image 2 and 3)
  • The cover should now come out. It will require some bending and pay attention to the motherboard while performing this task.

  • Remove the connectors (as shown on image 2 and 3)

Die Abdeckung sollte jetzt herauskommen. Dabei muss sie etwas gebogen werden, achte dabei auf das Motherboard.

Entferne die Stecker (wie in Bild 2 und 3 gezeigt)

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.