Ga door naar hoofdinhoud

iPod 第 4 代或 Photo 後面板更換

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 10 handleidingen die deze stap bevatten.

Stap 3
iPod 4th Generation or Photo Rear Panel Replacement: stap 0, afbeelding 1 van 1
  • The iPod case is now open, but don't separate the two halves just yet. There is still an orange ribbon cable connecting the headphone jack to the logic board.

  • Open the case like a book with the dock connector edge at the top, and lay the rear panel next to the front half of the iPod.

iPod 外殼現已打開,但暫時不要將兩半分開。 仍然有一條橙色的帶狀電纜將耳機插孔連接到邏輯板。

像書本一樣打開外殼,底座連接器邊緣位於頂部,然後將後面板放在 iPod 前半部分旁邊。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.