Ga door naar hoofdinhoud
Engels
Nederlands
Stap 10
Close the display and flip the computer over. Remove the two 5mm Phillips screws securing the battery connector to the metal framework.
  • Close the display and flip the computer over.

  • Remove the two 5mm Phillips screws securing the battery connector to the metal framework.

  • Lift the battery connector out of the metal framework and disconnect it from the logic board.

  • This connector requires considerable force to remove. We recommend wiggling the connector while applying tension to slowly "walk" the connector out of its socket.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.