Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 4 handleidingen die deze stap bevatten.

Engels
Nederlands

Stap 2 vertalen

Stap 2
Use plastic spudger to separate backplate from the front-plate.  Place the flat end of the spudger in the seam between the front and back, near one end of the calculator.  Then slide the spudger towards the calculator's center.  The two sides will  pop free from each other as you go through it with the spudger. Use plastic spudger to separate backplate from the front-plate.  Place the flat end of the spudger in the seam between the front and back, near one end of the calculator.  Then slide the spudger towards the calculator's center.  The two sides will  pop free from each other as you go through it with the spudger. Use plastic spudger to separate backplate from the front-plate.  Place the flat end of the spudger in the seam between the front and back, near one end of the calculator.  Then slide the spudger towards the calculator's center.  The two sides will  pop free from each other as you go through it with the spudger.
  • Use plastic spudger to separate backplate from the front-plate. Place the flat end of the spudger in the seam between the front and back, near one end of the calculator. Then slide the spudger towards the calculator's center. The two sides will pop free from each other as you go through it with the spudger.

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.