Ga door naar hoofdinhoud
Engels
Nederlands

Stap 1 vertalen

Stap 1
Disconnect all five wire bundles attached to the motherboard by pulling them away from their connection. The order in which the wire bundles are removed does not matter.
  • Disconnect all five wire bundles attached to the motherboard by pulling them away from their connection.

  • The order in which the wire bundles are removed does not matter.

  • You may need to remove some black foam tape in order fully disconnect some of the wires.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.