Ga door naar hoofdinhoud
Engels
Nederlands
Stap 7
Insert a 1.4 mm Tri-point screw into each of the outer holes drilled into the trackpad (two screws total).
  • Insert a 1.4 mm Tri-point screw into each of the outer holes drilled into the trackpad (two screws total).

  • You'll install the rest in a bit.

  • Tighten the screws all the way, then back them out about a quarter turn to aid in aligning your trackpad during the next few steps.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.