Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 10
Gently lift the rear circuit board away from the camera. The film behind it is attached, but not securely.  Keep the circuit board and the film together to avoid damage.
  • Gently lift the rear circuit board away from the camera.

  • The film behind it is attached, but not securely. Keep the circuit board and the film together to avoid damage.

  • Rotate the circuit board 180 degrees so that it is directly below the camera.

  • Now gently remove the front circuit board and rotate both the rear and front circuit boards 180 degrees so that they are directly above the camera (picture 2).

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.