Ga door naar hoofdinhoud
Engels
Nederlands
Stap 3
Begin by removing the small piece of black foam located at the top right of the LCD screen. (Picture 1) Remove screw which is located exactly where the black foam was. (Picture 1) After screw is removed lift right side of LCD screen straight upward and pull to towards the right side of the camera. (Picture 2)
  • Begin by removing the small piece of black foam located at the top right of the LCD screen. (Picture 1)

  • Remove screw which is located exactly where the black foam was. (Picture 1)

  • After screw is removed lift right side of LCD screen straight upward and pull to towards the right side of the camera. (Picture 2)

  • The LCD screen will pull out of the camera and 2 ribbon circuits will need to be detached.

  • Detach both by carefully pulling out of black locking mechanism. (Picture 3)

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.