Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands

Stap 4 vertalen

Stap 4
Remember the trick about how the clips go--we're doing it in reverse now.  First engage the bottom center clips (shown top in this image) in their top most position, then engage the side clips by pushing the plastic trim piece down. Don't forget to reinstall the two phillips head screws that retain the trim piece.
Reassemble Seat Back and Reinstall
  • Remember the trick about how the clips go--we're doing it in reverse now. First engage the bottom center clips (shown top in this image) in their top most position, then engage the side clips by pushing the plastic trim piece down.

  • Don't forget to reinstall the two phillips head screws that retain the trim piece.

  • With the seat in the car still all the way forward, you should be able to easily engage the seat back into its tracks, pushing it up until you can engage the screw at the bottom. Enjoy your restored seat back netting!

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.