Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands

Stap 1 vertalen

Stap 1
Start by turning the seat angle adjusting knob clockwise so that the seat is leaning all the way forward.  This is necessary for clearance. Using a phillips head screwdriver, loosen the single screw holding the seat back at the bottom of the seat.
Remove Seat Back
  • Start by turning the seat angle adjusting knob clockwise so that the seat is leaning all the way forward. This is necessary for clearance.

  • Using a phillips head screwdriver, loosen the single screw holding the seat back at the bottom of the seat.

  • Remove the seat back by sliding it downwards towards the floor. Once it is approximately 50-70% down, it should clear its tracks with enough space to facilitate removal by pulling down and towards the rear seat. It should come out very easily.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.