Ga door naar hoofdinhoud

iPhone 7 분해도

Stap 8
iPhone 7 Teardown: stap 0, afbeelding 1 van 3 iPhone 7 Teardown: stap 0, afbeelding 2 van 3 iPhone 7 Teardown: stap 0, afbeelding 3 van 3
  • With the new camera out of the way, we work our way deeper into the 7.

  • Next out: the audio baffle that thinks it's a headphone jack.

  • Teardown Update: According to Apple, this plastic component is a barometric vent. With the added ingress protection afforded by the watertight seal, the iPhone uses this baffle to equalize the internal and atmospheric pressures in order to have an accurate altimeter.

  • This Taptic Engine takes advantage of its extra legroom, sizing up for its home button haptic duties.

  • With the path cleared, we use our handy spudger to release the adhesive from beneath the battery. We wind up and peel out the three battery pull tabs.

새 카메라를 치워놓고, 우리는 iPhone 7으로 깊숙이 들어갑니다.

다음 분리: 헤드폰 잭이라고 스스로 착각하는 audio baffle/오디오 배플.

분해도 업데이트: Apple에 따르면 이 플라스틱 부품은 기압 벤트라고 합니다. 방수 씰링은 추가 방수 방진 기능을 제공하며, iPhone은 이 baffle/배플을 사용하여 내부 압력과 기압을 균등하게 만들어 고도계의 정확성을 높입니다.

이 Taptic Engine/탭틱 엔진은 넓어진 공간을 활용하여 홈 버튼 촉감 기능에 맞게 크기를 키웠습니다.

장애물을 치우고 유용한 spudger/스퍼저를 사용하여 배터리 아래 있는 접착제를 제거합니다. 배터리 당김 탭 세 개를 감아 서 떼어냅니다.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.