Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Stap 3
So here you can see that I've detached the SATA cable from the HDD, attached the OWC thermal sensor cable and have already connected the SSD. The OWC cable is a bit stiff but all I had to do was twist it a bit so the SSD laid flat inside the iMac. This entire pocket where I show the SSD is normally empty and the perfect spot for a tiny SSD.
  • So here you can see that I've detached the SATA cable from the HDD, attached the OWC thermal sensor cable and have already connected the SSD.

  • The OWC cable is a bit stiff but all I had to do was twist it a bit so the SSD laid flat inside the iMac. This entire pocket where I show the SSD is normally empty and the perfect spot for a tiny SSD.

Qui puoi vedere che ho staccato il cavo SATA dall'HDD, ho collegato il cavo del sensore termico OWC e ho già collegato l'SSD.

Il cavo OWC è un po' rigido, ma è bastato attorcigliarlo un po' per far sì che l'SSD poggiasse piatto all'interno dell'iMac. L'intera nicchia dove ho posizionato l'SSD è normalmente vuota, il posto perfetto per un piccolo SSD.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.