Repareer je spullen Gemeenschap Winkel

Palm m105 Button Replacement

Terug naar de handleiding
Engels
Nederlands
Stap 4
Palm m105 Button Replacement: stap 0, afbeelding 1 van 3 Palm m105 Button Replacement: stap 0, afbeelding 2 van 3 Palm m105 Button Replacement: stap 0, afbeelding 3 van 3

  • Using a T-5 Torx screwdriver, remove all four screws located on the back of the device. Turn counterclockwise to remove screws. The link to purchase this screwdriver is located at the top of this page.

  • Once you have removed all four screws, the device will be in three separate pieces (the back, the computer, and the button board).

  • Take caution as the power button will become loose after this step is completed.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.