Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Stap 1 vertalen

Stap 1
Remove the two silver T6 6 mm Torx screws from the left side of the hard drive.
  • Remove the two silver T6 6 mm Torx screws from the left side of the hard drive.

  • You'll need to transfer these screws to your new hard drive if you're changing drives.

Rimuovere le due viti Torx T6 argentate da 6 mm dal lato sinistro del disco rigido.

Trasferire queste viti nel nuovo SSD.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.