Repareer je spullen

Recht op reparatie

Winkel

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 2 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Italiaans
Volgende stap

Stap 1 vertalen

Stap 1
If your new optical drive already has brackets on it, you'll only need to transfer the data cable to your new drive. Skip the bracket removal steps below. Remove the two silver Phillips screws securing the mounting bracket to the left side of the optical drive.

  • If your new optical drive already has brackets on it, you'll only need to transfer the data cable to your new drive. Skip the bracket removal steps below.

  • Remove the two silver Phillips screws securing the mounting bracket to the left side of the optical drive.

  • Rotate the drive and disconnect the orange ribbon cable from the optical drive.

Le nuova unità ottica è già dotata di staffe, occorre solo trasferire il cavo dati.

Rimuovere le due viti con testa a croce argentate che fissano la staffa di montaggio al lato sinistro dell'unità ottica.

Ruotare l'unità e scollegare il cavo piatto arancione dall'unità ottica.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.