Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 22
Attach the other end of your new cable to the logic board where the optical drive was connected.
  • Attach the other end of your new cable to the logic board where the optical drive was connected.

  • Carefully wrap up the extra cable and store it to the side of the hard drive.

  • Getting everything to fit with these particular cables is somewhat challenging. If you don't stow the cable correctly, it will prevent the case from going back on all the way, and could also damage the hard drives.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.