Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 14
Secure the thermal sensor to the new hard drive. The original adhesive on the back of the thermal sensor should hold the sensor in place. Reuse the black tape from the old drive to secure the thermal sensor wire to the new drive. Your newly-installed drive should look very similar to the third picture.
  • Secure the thermal sensor to the new hard drive. The original adhesive on the back of the thermal sensor should hold the sensor in place.

  • Reuse the black tape from the old drive to secure the thermal sensor wire to the new drive.

  • Your newly-installed drive should look very similar to the third picture.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.