Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 13
Hold the new drive in place and attach it to the frame using the four Phillips screws. Plug the interconnect board into the new drive, making sure that all wires are in their original place. Route the black thermal sensor wire back through the notch.
  • Hold the new drive in place and attach it to the frame using the four Phillips screws.

  • Plug the interconnect board into the new drive, making sure that all wires are in their original place.

  • Route the black thermal sensor wire back through the notch.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.