Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 12
Unplug the interconnect board from the hard drive. The interconnect board is still held in place by other connectors. Make sure that the they are not separated from the interconnect board. Remove the four Phillips screws that hold the drive in place.
  • Unplug the interconnect board from the hard drive.

  • The interconnect board is still held in place by other connectors. Make sure that the they are not separated from the interconnect board.

  • Remove the four Phillips screws that hold the drive in place.

  • The stock hard drive can now be removed.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.