Ga door naar hoofdinhoud
Stap 11
Remove the six Philips screws from the left, right, and back sides of the SuperDrive. Unplug the drive from the interconnect board to completely remove it from the framework. Unplug the drive from the interconnect board to completely remove it from the framework.
  • Remove the six Philips screws from the left, right, and back sides of the SuperDrive.

  • Unplug the drive from the interconnect board to completely remove it from the framework.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.