Ga door naar hoofdinhoud
Stap 3
Let's rock this thing! Carefully insert a putty knife into the crevice in between the top cover and bottom housing. Start on the left side first. Gently enlarge the existing crevice by twisting the putty knife downward and away from the mini.
  • Let's rock this thing!

  • Carefully insert a putty knife into the crevice in between the top cover and bottom housing. Start on the left side first.

  • Gently enlarge the existing crevice by twisting the putty knife downward and away from the mini.

  • Repeat the prying motion until a portion of the bottom housing has been nudged upward.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.