Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 4
Use the flat end of a spudger to lift the rear-facing camera cable connector from its socket on the logic board. Lift the sensor cable connector from its socket. Disconnect the right cellular antenna from the logic board.
  • Use the flat end of a spudger to lift the rear-facing camera cable connector from its socket on the logic board.

  • Lift the sensor cable connector from its socket.

  • Disconnect the right cellular antenna from the logic board.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.