Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Stap 17
Use eight of the short Phillips #0 screws to secure the rear body. Remember, the single long screw goes below the barrel. Use two more short screws to reconnect the two halves of the cocking mechanism.
Replace body screws.
  • Use eight of the short Phillips #0 screws to secure the rear body.

  • Remember, the single long screw goes below the barrel.

  • Use two more short screws to reconnect the two halves of the cocking mechanism.

  • Lastly, slide the cocking mechanism back slightly to reveal the last two screw holes. Use your last two short screws to secure the front body.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.