Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 25 handleidingen die deze stap bevatten.

Stap 5
Insert a second opening pick alongside the first and slide the pick down along the edge of the iPad, releasing the adhesive as you go. Throughout the rest of the procedure, if you encounter significant resistance while sliding the pick, stop and reheat the section you're working on. Applying too much pressure with the pick can crack the glass. Throughout the rest of the procedure, if you encounter significant resistance while sliding the pick, stop and reheat the section you're working on. Applying too much pressure with the pick can crack the glass.
  • Insert a second opening pick alongside the first and slide the pick down along the edge of the iPad, releasing the adhesive as you go.

  • Throughout the rest of the procedure, if you encounter significant resistance while sliding the pick, stop and reheat the section you're working on. Applying too much pressure with the pick can crack the glass.

Placez un deuxième médiator à côté du premier et faites-le glisser le long de l'iPad, en décollant l'adhésif au fur et à mesure.

Si, au cours du reste de la procédure, vous rencontrez une résistance importanteen faisant glisser les médiators sous le verre, arrêtez et réchauffez la section sur laquelle vous travaillez. Forcer avec le médiator risque de fissurer le verre.

-[* black] Place a second opening pick alongside the first and slide the pick down along the edge of the iPad, releasing the adhesive as you go.
-[* icon_caution] Throughout the rest of the procedure, if you encounter significant resistance to sliding picks beneath the glass, stop and reheat the section you're working on. Applying too much pressure with the pick can crack the glass.
+[* black] Insert a second opening pick alongside the first and slide the pick down along the edge of the iPad, releasing the adhesive as you go.
+[* icon_caution] Throughout the rest of the procedure, if you encounter significant resistance while sliding the pick, stop and reheat the section you're working on. Applying too much pressure with the pick can crack the glass.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.