Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 21 handleidingen die deze stap bevatten.

Stap 3
While holding the glass up with the suction cup, slide the point of an opening pick into the gap between the glass and body of the iPad. Don't insert the opening pick any deeper than 2 mm into the side of the display. Inserting the pick deeper than 2 mm could damage the backlight assembly, LCD display, or touchscreen.
  • While holding the glass up with the suction cup, slide the point of an opening pick into the gap between the glass and body of the iPad.

  • Don't insert the opening pick any deeper than 2 mm into the side of the display. Inserting the pick deeper than 2 mm could damage the backlight assembly, LCD display, or touchscreen.

吸盤でガラスを引き上げながら、ピックの先端をガラスとiPad本体の隙間に差し込みます。

ピックをディスプレイ横にある黒い外縁よりも奥に差し込まないでください。深くまで差し込み過ぎると、液晶ディスプレイを傷つけてしまうことがあります。

[* black] While holding the glass up with the suction cup, slide the point of an opening pick into the gap between the glass and body of the iPad.
[* icon_caution] Don't insert the opening pick any deeper than the black bezel on2 mm into the side of the display. Inserting the pick too far maydeeper than 2 mm could damage the LCDbacklight assembly, LCD display, or touchscreen.
[* icon_caution] Don't insert the opening pick any deeper than the black bezel on2 mm into the side of the display. Inserting the pick too far maydeeper than 2 mm could damage the LCDbacklight assembly, LCD display, or touchscreen.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.