Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 10
Disconnect a linkage between the temperature control mechanism and the steam valve. You can do this by pressing one part with a small  flat-blade screwdriver while supporting the other underneath. Take care as these small plastic parts could easily be broken. A linkage on the other side operated by the automatic steam control simply lifts off.
Removing the plastic base - 1
  • Disconnect a linkage between the temperature control mechanism and the steam valve. You can do this by pressing one part with a small flat-blade screwdriver while supporting the other underneath. Take care as these small plastic parts could easily be broken.

  • A linkage on the other side operated by the automatic steam control simply lifts off.

  • Slide both mechanisms back as far as they will go.

  • Note that on reassembly both mechanisms and the knobs controlling them must all be in their rear-most positions to ensure they re-connect correctly.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.