Repareer je spullen Gemeenschap Winkel

iMac Intel 21.5" Retina 4K Displayeinheit trennen

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 27 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Duits
Stap 2
iMac Intel 21.5" Retina 4K Display Assembly Replacement: stap 0, afbeelding 1 van 3 iMac Intel 21.5" Retina 4K Display Assembly Replacement: stap 0, afbeelding 2 van 3 iMac Intel 21.5" Retina 4K Display Assembly Replacement: stap 0, afbeelding 3 van 3

  • Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red).

  • Grasp the small tab at the end of one of the bottom edge display adhesive strips and pull the adhesive toward the top of the iMac to remove it.

  • Repeat this step with the other adhesive strip and remove it.

  • If either adhesive strip breaks before it's removed, use a plastic card to slice through the remaining adhesive.

Trenne, wenn nötig, die letzten Reste der Verklebung am unteren Rand mit einer Plastikkarte auf.

-[* icon_note] If necessary, a plastic card can be used to cut any remaining sections of the bottom adhesive strip.
+[* icon_caution] Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red).
+[* black] Grasp the small tab at the end of one of the bottom edge display adhesive strips and pull the adhesive toward the top of the iMac to remove it.
+[* black] Repeat this step with the other adhesive strip and remove it.
+[* icon_note] If either adhesive strip breaks before it's removed, use a [product|IF145-101|plastic card] to slice through the remaining adhesive.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.