Ga door naar hoofdinhoud
Engels
Nederlands
Stap 6
The shafts are held by bushings which are threaded on the outside. Nuts on the inside of the carriage hold the bushings in place. Unscrew the bushings. You may need to hold the nuts on the inside with a finger or needle-nose pliers.
  • The shafts are held by bushings which are threaded on the outside. Nuts on the inside of the carriage hold the bushings in place.

  • Unscrew the bushings. You may need to hold the nuts on the inside with a finger or needle-nose pliers.

  • 5x Slotted-head bushing, ID 0.141", threaded on outside 1/4-32, length 1/8"

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.