Ga door naar hoofdinhoud
Engels
Nederlands

Stap 1 vertalen

Stap 1
Using a small X-Acto knife or pin, carefully lift the tape. Peel it back to  lift the top of the contact switch.
Lift the tape
  • Using a small X-Acto knife or pin, carefully lift the tape. Peel it back to lift the top of the contact switch.

  • NOTE: Do not completely remove the tape. Leave the other side attached as shown in the next step. This will allow you to easily align the top contact with the bottom after cleaning.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.