Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 23 handleidingen die deze stap bevatten.

Stap 4
Open the iPhone by swinging the home button end of the front panel assembly away from the rear case, using the top of the phone as a hinge. Several clips along the top edge of the front panel form a partial hinge. During reassembly, align the clips just below the top edge of the rear case. Then, slide the front panel upward until its top edge is flush with that of the rear case.
Opening up the phone
  • Open the iPhone by swinging the home button end of the front panel assembly away from the rear case, using the top of the phone as a hinge.

  • Several clips along the top edge of the front panel form a partial hinge.

  • During reassembly, align the clips just below the top edge of the rear case. Then, slide the front panel upward until its top edge is flush with that of the rear case.

Ouvrez l'iPhone en soulevant la partie de l'écran avec le bouton home tout en utilisant la partie supérieure du téléphone pour faire charnière.

Plusieurs clips le long du bord supérieur de l'écran créent une charnière partielle.

Lors du remontage, alignez les clips correctement sous le bord supérieur du boîtier. Puis insérez l'écran jusqu'à ce que son bord supérieur soit au même niveau que celui du boîtier.

[title] Opening up the phone
[* black] Open the iPhone by swinging the home button end of the front panel assembly away from the rear case, using the top of the phone as a hinge.
[* icon_note] Several clips along the top edge of the front panel form a partial hinge.
[* icon_reminder] During reassembly, align the clips just below the top edge of the rear case. Then, slide the front panel upward until its top edge is flush with that of the rear case.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.