Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 23 handleidingen die deze stap bevatten.

Stap 1 vertalen

Stap 1
If you don't have an iSclack, use a single suction cup to lift the front panel:
Manual Opening Procedure
  • If you don't have an iSclack, use a single suction cup to lift the front panel:

  • Press a suction cup onto the screen, just above the home button.

  • Be sure the cup is pressed securely onto the screen to get a tight seal.

  • If your display is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken screen.

如果你没有iSclack这个工具,使用单个吸盘来分离前面板。

将吸盘按压在屏幕上,位置在Home键的正上方。

按紧吸盘以保障气密性。

如果你的iPhone屏幕严重破裂,用一层透明胶带覆盖它可能会使吸盘粘住。 或者,可以使用非常结实的胶带代替吸盘。 如果所有其他方法都失败了,您可以用强力胶将吸盘粘在破损的屏幕上。

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.