Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 23 handleidingen die deze stap bevatten.

Stap 1 vertalen

Stap 1
If you don't have an iSclack, use a single suction cup to lift the front panel:
Manual Opening Procedure
  • If you don't have an iSclack, use a single suction cup to lift the front panel:

  • Press a suction cup onto the screen, just above the home button.

  • Be sure the cup is pressed securely onto the screen to get a tight seal.

  • If your display is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken screen.

Se non hai un iSclack, usa una ventosa singola per sollevare il pannello frontale:

Premi una ventosa sullo schermo, appena sopra il pulsante home.

Assicurati che la ventosa sia ben premuta contro lo schermo per creare una forte tenuta.

[title] Manual Opening Procedure
[* black] If you don't have an iSclack, use a single suction cup to lift the front panel:
[* black] Press a suction cup onto the screen, just above the home button.
[* icon_note] Be sure the cup is pressed securely onto the screen to get a tight seal.
[* icon_note] If your display is badly cracked, [guide|103486|covering it with a layer of clear packing tape|stepid=193571|new_window=true] may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken screen.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.