Ga door naar hoofdinhoud

Installazione dell'unità ottica nell'iMac Intel EMC 2389 da 21,5"

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 20 handleidingen die deze stap bevatten.

Stap 4 vertalen

Stap 4
iMac Intel 21.5" EMC 2389 Optical Drive Replacement: stap 0, afbeelding 1 van 1
  • Disconnect the optical drive cable by pulling its connector away from the optical drive.

  • Remove the optical drive from the iMac.

  • Do not forget to also move the thermal sensor from the optical drive to the enclosure when you install the second hard drive.

Scollegare il cavo dell'unità ottica estraendone il connettore.

Rimuovere l'unità ottica dall'iMac.

Non dimenticare di trasferire il sensore termico dall'unità ottica al nuovo case quando installi il secondo disco rigido.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.