Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 8
Insert the nozzle of a funnel into the primary chain inspection hole. Pouring slowly, pour approximately 1 qt of oil into the transmission.
Adding New Oil
  • Insert the nozzle of a funnel into the primary chain inspection hole.

  • Pouring slowly, pour approximately 1 qt of oil into the transmission.

  • As you pour, watch the clutch inspection hole. Make sure that the oil level stays below the edge of the clutch inspection hole.

  • This may require less than the entire quart of oil.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.