Ga door naar hoofdinhoud
Stap 7
Re-insert the transmission drain plug into the transmission housing and hand tighten. Using a 3/4" wrench, tighten down the transmission drain plug.
Installing the Transmission Drain Plug
  • Re-insert the transmission drain plug into the transmission housing and hand tighten.

  • Using a 3/4" wrench, tighten down the transmission drain plug.

  • It is important to not over-tighten the drain plug. Tightening the plug too much can strip the threads on the aluminum housing. The plug should be tight, but not too tight. The correct torque specification is 14 - 21 ft-lbs (168 - 252 in-lbs).

重新将传动油排油口油塞装入。并用手拧紧。

使用 3/4"扳手再次上紧塞子。

注意不要将塞子上的过紧。 上的过紧会导致滑螺纹破损。 正确的扭矩为14 - 21 ft-lbs (168 - 252 in-lbs).

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.