Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 7
Re-insert the transmission drain plug into the transmission housing and hand tighten. Using a 3/4" wrench, tighten down the transmission drain plug.
Installing the Transmission Drain Plug
  • Re-insert the transmission drain plug into the transmission housing and hand tighten.

  • Using a 3/4" wrench, tighten down the transmission drain plug.

  • It is important to not over-tighten the drain plug. Tightening the plug too much can strip the threads on the aluminum housing. The plug should be tight, but not too tight. The correct torque specification is 14 - 21 ft-lbs (168 - 252 in-lbs).

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.